News
Seven maintenance and maintenance methods for non-woven production line equipment
Today, we will talk about the seven maintenance methods of non-woven production line equipment. Changshu Ruilong Non-woven Machinery Equipment Co., Ltd. will introduce the seven maintenance and maintenance methods of non-woven production line equipment.
Maintenance measures for non-woven fabric production line equipment, non-woven fabric production line is the main equipment for manufacturing non-woven fabrics. In order to improve its working efficiency and prolong its service life during use, we must maintain the non-woven production line equipment. The specific maintenance steps are as follows:
1. All oiling points of non-woven fabric production line equipment must be regularly filled with oil, lubricating oil or grease according to the requirements of their parts.
2. The seals (wearing parts) must be checked every day, and replaced immediately if damaged.
3. Check the guard plate of the chamber body every day, and replace it immediately if it is damaged.
4. Check the guard plate, blade, impeller, directional sleeve, and shot wheel of the shot blaster twice every shift, and replace it immediately if there is any damage.
5. The electrical system should be checked twice.
6. All transmission parts are inspected twice a week.
7. The operator should check the cleaning effect at any time. If there is any abnormality, stop the machine immediately and conduct an overall inspection of the equipment.
Maintenance measures for non-woven fabric production line equipment, non-woven fabric production line is the main equipment for manufacturing non-woven fabrics. In order to improve its working efficiency and prolong its service life during use, we must maintain the non-woven production line equipment. The specific maintenance steps are as follows:
1. All oiling points of non-woven fabric production line equipment must be regularly filled with oil, lubricating oil or grease according to the requirements of their parts.
2. The seals (wearing parts) must be checked every day, and replaced immediately if damaged.
3. Check the guard plate of the chamber body every day, and replace it immediately if it is damaged.
4. Check the guard plate, blade, impeller, directional sleeve, and shot wheel of the shot blaster twice every shift, and replace it immediately if there is any damage.
5. The electrical system should be checked twice.
6. All transmission parts are inspected twice a week.
7. The operator should check the cleaning effect at any time. If there is any abnormality, stop the machine immediately and conduct an overall inspection of the equipment.
